Don’t forget to check out Part One in this video series about:
Connecting a “P” Trap to a Kitchen Sink – Part One

So as you’ll see in this video (part two), you have some choices when trying to get from the trap to the sink strainer.

On brand new installations, I always try to line up my tailpiece to go straight into the trap (for my master sink) without the use of any turns at all.

Truth is that in a retrofit or repair setting, that’s not always possible so the use of 90’s or 45’s is a fact of life.

If you’re going to be connecting two sinks, the use of a swing tee trap is essential when stubbing out with 2″ galvanized pipe. You can screw the trap right onto the stub out and you’re good to go.

On the other hand if you’re using PVC pipe, you can use a trap adapter to transition to the 1-1/2′ tubing or you can connect the auxiliary sink with a section of 1-1/2″ PVC pipe by installing a TY fitting right onto the PVC trap.

Fear not, I’ll feature this technique for you in a future video.

If you have the cash, I would highly recommend investing in a good quality (Ridgid) tubing cutter especially if you’re going to be doing quite a few repairs.

On the other hand, a 32 teeth per inch hack blade will get the job done.

That about wraps it up for this two part series, as always if you still have questions you can reach me at info@bobsplumbingvideos.com.

Happy Plumbing!