BobsPlumbingVideos.com

Real Life Plumbing Advice for People Who Don't Want To Call A Plumber

  • Home
  • How-To-Fix Videos
    • General Plumbing
    • In The Kitchen
    • In The Bathroom
    • Toilet Repairs
    • Heating Problems
    • Hot Water Problems
  • Plumbing Articles
    • Quick Tips
    • Tool Reviews
    • Bobs Recommended Tools
  • About BPV
    • About Bob Sessa
    • Press Photos
    • Follow BobsPlumbingVideos.com
    • Find a Local Plumber – Coming Soon!
  • Got A Plumbing Problem? Ask Bob

The Most Common Mistakes People Make When Hiring a Plumber!

December 12, 2013 By BobsPlumbingVideos Leave a Comment

Mistake #1: Not Asking For ReferencesMistake #1: Not Asking For References!

The least painful way of avoiding problems when hiring plumbers is to ask for references. A reputable plumbing company will be more than happy to provide you with references and if they won’t, keep searching. I would ask for a minimum of at least three with their contact phone numbers and or e-mail address. Now it’s time to follow up and ask questions about their experience with the potential company you’re considering hiring. Listen to them closely and then make an informed decision, in my opinion this is the best route to take when hiring a plumbing company. Are you guaranteed a good experience? Not at all, but compared to surfing the internet or looking in those antiquated phone books, the odds are certainly in your favor.

 

Mistake #2: Cheap Doesn’t Necessarily Mean GoodMistake #2: Cheap Doesn’t Necessarily Mean Good!

Did you ever hear that saying you what you pay for? IF a cheap job goes wrong you wasted your money. Price is not important if you pay half as much and then have to do the job over again. When hiring a company you should be more interested in the best value, price should be secondary. A plumbing company that uses the best materials hires the most talented plumbers and provides the best service should command higher prices. I would not look at companies that charge by the hour because if they have slow working technicians, you will pay more for the job. The price also tends to change as the job progresses either because they missed something or the job was more difficult than they anticipated. You should look to companies that use Flat Rate based pricing; they’ll quote an exact price up front so you’ll know exactly what you’ll pay. No surprises!

 

Mistake #3: All Plumbers Are Not The SameMistake #3: All Plumbers Are Not The Same!

Plumbing is a combination of craftsmanship and art combined. Believe it or not plumbing is not just banging on pipes or unclogging drains. Plumbers will diagnose measure and perform complicated calculations before proceeding with their work. In New York City which is where I’m from, it takes a minimum of five long hard years of working the field before you’re considered marginally proficient at the job. If you decide to become a Master Plumber, add two more years before you can even take the test and then plan on going to school at night for a solid year just to prepare for the test. No, all plumbers are not alike therefore you should ask many questions before hiring one. Question’s such as: Do you work weekends? What’s your turn around time? What type of work they specialize in? (You don’t want a new construction plumber servicing your heating system) Do you provide 24hr emergency service? Ask any other questions that are unique to your needs. After you ask your question of several companies, you should have a better idea of which one is right for you. If they want your business they’ll go out of their way to win it! All plumbers are not the same, so please don’t assume they are.

 

Mistake #4: Having a Few Plumbers Compete For Your WorkMistake #4: Having a Few Plumbers Compete For Your Work!

Sounds like a plan at first, but let me tell you why I think this isn’t a good way to deal with plumbers. Most reputable plumbers have a steady stream of business from long time loyal clients. Enough so, that they don’t have to deal with the price shoppers! If you find or even currently have a good plumber you trust and feel comfortable with, why would you flip flop from one to another? Getting a cheaper price might be important to you but it shouldn’t be more important than great service and quality. If your loyal to your plumber, trust me he will go out of his way for you when the chips are down. Maybe emergency service during the week or perhaps on weekends, maybe having to work all night long to get a difficult job finished so you can have your hot water or heat back. You never know when that scenario will present itself, but I can tell you if you’re loyal to your plumber he will be loyal to you. Keep loyalty in mind when you hire a plumber.

 

Mistake #5: Hiring Plumbers who don’t guarantee Their WorkMistake #5: Hiring Plumbers who don’t guarantee Their Work!

Unfortunately, there are unethical plumbing companies who don’t guarantee their work. They won’t make good on their work and probably won’t take responsibility for their own mistakes. Some companies when called back to fix a problem that should be guaranteed will try to blame you because of miscommunication and then have the nerve to tack on extra charges to make it right. All reputable plumbers guarantee their work unconditionally. This means if they make the mistake on your job, they will re-do or fix your job at NO CHARGE to you! The next time you hire a plumber, ask them if they unconditionally guarantee their work. If they get a dazed and confused look on their face, I suggest you keep looking.

 

Mistake #6: Not allowing Enough Time for Your Plumber to Finish Your Job ProperlyMistake #6: Not allowing Enough Time for Your Plumber to Finish Your Job Properly!

Everyone is in a hurry but it’s a good idea to have several meetings with your plumber to get a sense of how long your job will take. You’ll save time, money and aggravation with the proper communication from the beginning. I can tell you from experience that a fair amount of jobs generally take longer and cost more than anticipated. Most people feel a plumber’s work is relatively easy and therefore everything will move along without a hitch. Think again! Ever hear of Murphy’s Law? In short it states “anything that can go wrong will go wrong” and it usually does. Most reputable plumber’s are busy, they’re not sitting around waiting for a job to walk through the door so you should let them know in advance what you want installed or fixed so they can plan accordingly. Good communication from the start will ensure a smooth and trouble free experience!

 

Your Plumbing SystemsYour Plumbing Systems!

In closing I’d like to add that if your plumbing system seems to be working fine, it may not be the case. Just as the human body and family car need periodic examinations and checkup’s, so does your homes plumbing systems. Most people wouldn’t think of driving thousands of miles without checking the condition of their vehicle. Unlike the family car however, your plumbing system doesn’t have warning lights to alert you of potential problems. Ironically, this is the most often used system in your home and it undergoes the most wear and tear. Are you aware the 99% of all plumbing emergencies can be avoided by having your plumbing systems checked at least annually? Start by finding a highly referred plumber in your area and make an appointment for a plumbing systems check-up today. You won’t be sorry!

HAPPY PLUMBING!

Filed Under: Plumbing Articles, Quick Tips Tagged With: choosing the right plumber, hiring a plumber, how to choose a plumber, plumbing advice, plumbing systems

Three Valve Shower Body Repair – part 2

December 6, 2013 By BobsPlumbingVideos Leave a Comment

Welcome back!

This is the second part of this 2 part video series “Three Valve Shower Body Repair”. If you haven’t seen part 1 then please check it out first here:
Three Valve Shower Body Repair – Part 1

OK so hopefully you removed the handles, sleeves and escutcheons with out too much trouble, it’s now time to remove the seats. As you can see my double sided seat removal tool has  a square and hexagonal end and depending on your own situation you’ll make the choice on which to use. If this is and old shower body that’s been in for years you’ll have to give it a couple of tap’s with your hammer to set the the tool and the seat should come out. I want to mention again that when removing the shower body stem, make sure you look for the nylon or graphite washer that’s  located at the base of the stem. If don’t see it check inside and make sure it’s inside the body, make sure you didn’t lose it inside the wall or you’ll have problems later.

Now when replacing a seat regardless of whether it’s for a tub faucet, kitchen faucet or bathroom faucet I generally install it without putting any Teflon tape around the threads. Some plumber always use it but as a rule I only use it if the seat alone won’t hold. If you feel comfortable putting a little Teflon around the seat before you install it, go for it! Now it’s a matter of reversing the procedure as outlined in part one of this two part series. Before you install the stem back into the body make sure it’s in the fully opened position. This goes for any faucet stem you’re installing, if it’s in the closed position or the halfway position you will smash the washer and brass cup up against the faucet seat increasing the chance of damaging the stem and or the shower body.

Don’t forget to use some silicone water proof lubricant to aid in the removal of the chrome sleeves and handles for future repairs. Use a good quality latex based caulk to seal around the sleeves for a watertight seal and you should be good to go! I want to thank you again for dropping by the site and if you still have questions about this or any of my videos, you can e-mail me info@bobsplumbingvideos.com.

HAPPY PLUMBING!

 

Filed Under: How-To-Fix Videos, In The Bathroom Tagged With: 3 handle shower faucet repair, bath faucet, faucet repair, replace a shower valve body, shower body, three handle bath tub faucet repair, three valve shower body repair, tub faucet

Three Valve Shower Body Repair – part 1

December 6, 2013 By BobsPlumbingVideos Leave a Comment

Welcome to my two part series called “Three Valve Shower Body Repair”. This is part 1.

In this two part series I take you through the steps on removing and replacing the stems and seats in a three valve shower body. When I started in the business back in the late 60’s early 70’s we would actually replace the washers, seats and re-pack the stems with new graphite packing. In today’s world that’s not a cost effective alternative any more so we just replace the old with new O.E.M. parts when available

The manufacturer featured in the video is Gerber which in my opinion makes a real good product and is very popular here on the east coast. Some other popular makers of this style shower body are Price Pfister, Sterling, Central to name a few.  They’re similar in design with slightly different takes on how the sleeves and escutcheons are attached. As in most of the videos to date , I’m demonstrating on the bench top with a new fitting which means everything  is being removed easily. A word of caution is that in the real world this may not be the case, and you’re going to need a couple of specialty tools  which I point out in the video. As you can see in the video this shower body is set quite deep into the wall which can make removing the chrome sleeves a challenge. Before attempting to remove the sleeves regardless of how shallow or deep into the wall they are, you have to chip away and remove the tile grout or caulking. This will increase the success rate of  unscrewing and removing the sleeve without any damage.

Although we live in a world of Single Lever anti-scald shower body’s, rest assured that their are thousands of these shower body’s still in service and at some point they’re going to need repair. I laid out some recommended tools for this repair so check them out before you begin and if you have any questions, drop me a line at info@bobsplumbingvideos.com. I’ll see you in part 2:
Three Valve Shower Body Repair – Part 2

Happy Plumbing!

Filed Under: How-To-Fix Videos, In The Bathroom Tagged With: 3 handle shower faucet repair, bath faucet, faucet repair, replace a shower valve body, shower body, three handle bath tub faucet repair, three valve shower body repair, tub faucet

Diverter Stem Replacement

December 6, 2013 By BobsPlumbingVideos Leave a Comment

In this video I show you how to remove and replace the the center diverter stem in a three valve shower body. 

If you have never attempted a diverter stem replacement then I suggest you also check out my video series titled three valve shower body repair. You can watch them for free here:
Three Valve Shower Body Repair – Part 1
Three Valve Shower Body Repair – Part 2

I walk you through the steps on removing the hot and cold water stems along with some tool suggestions for getting the job done. The function the diverter stem is solely to direct the water to the shower head or the tub nozzle and with this repair you won’t have to shut off any water to the fixture itself. Just make sure the hot and cold water sides the shower body are in the off position.

To remove the stem you simply follow the same instructions out lined in my video “three valve shower body repair” where I demonstrate the removal of the hot and cold water stems. As you can see this stem looks a little different and has a two way function. When the stem is pull back away from the seat the water will travel through two openings in the stem that direct the water up to the shower head. When the washer is  closed against the seat the water travels full flow down through the tub nozzle. Their is also a seat inside the body that should be replace when you install a new stem, don’t forget to make sure the stem is in the fully opened position before placing in back into the body. If it’s in the closed or halfway position, you’ll chance damaging the stem and or shower body.

In a world of new style single lever pressure balanced tub and shower faucets, the three valve shower body still exists and when they fail, the repairs have to be made. I hope the video shed some light on the subject of replacing the stems and seats in these style shower bodies, and if you still have questions about this or any of my videos, you can e-mail me at info@bobsplumbingvideos.com.

HAPPY PLUMBING!

Filed Under: How-To-Fix Videos, In The Bathroom Tagged With: bath faucet, diverter stem, diverter stem repair, diverter stem replacement, faucet repair, shower body, three valve shower body repair, tub faucet

How To Solder Copper Tubing part 2

November 19, 2013 By BobsPlumbingVideos Leave a Comment

Here’s part 2 of how to solder copper tubing. 

If you haven’t seen part 1, check it out here: How to solder copper tubing – part 1

In part 1 I took you through preparation process and laid out the necessary tools and supplies for your soldering journey. In this video I demonstrate how to solder one horizontal and one vertical joint using 1/2″ copper tubing. As a rule on the smaller diameters (1/2″ & 3/4″) I’ll leave my torch tip on one area of the fitting and because I’m using Mapp fuel along with my Turbo Torch STK-1 tip the job gets done fast. One step often missed in the the soldering process is not reaming or d-burring the inside of the copper pipe. This step you don’t want to miss as it will cause turbulence resulting in noisy plumbing.When I solder I always heat the fitting which will insure that the solder will flow freely into the joint. Their seems to be many opinions on whether you should heat the pipe or fitting, but I was taught this way at an early age and to date it’s my opinion that heating the fitting will insure a leak free joint 100% of the time.

One other very important step I want to point out is that when your through soldering and the joint sets, it’s important to grab a damp cloth and wipe off all that excess flux. Did you ever see a nicely laid out series of water lines that were lined up perfectly both horizontally and vertically but was covered in crusty green gunk? Horrible! That’s the left over flux someone forgot to wipe off.  The soldering process is not to difficult to do and if you take it slowly, you should have no problem with it.

If you didn’t watch part 1, I recommend you check it out first. 

Remember you can always reach me at info@bobsplumbingvideos.com if you have any further questions.

HAPPY PLUMBING!

Filed Under: General Plumbing, How-To-Fix Videos Tagged With: copper pipe, copper tubing, how to solder copper pipes, how to solder copper tubing, solder, soldering

  • « Previous Page
  • 1
  • …
  • 9
  • 10
  • 11
  • 12
  • 13
  • …
  • 22
  • Next Page »

Voted 3rd Most Popular Site

Connect With Me

facebook twitter google plus youtube

Discover How To Fix The 7 Most Common Home Plumbing Problems Even If You've Never Picked Up A Wrench!

Simply Enter Your First Name & Email Address To Get Instant Access Now!

We will not sell, rent, give away your information. We hate spam too!

Recent Posts

  • Clogged Drain / D.I.Y.
  • Master Plumbers Exam / Practical Test
  • Bathtub Drain Stopper / Trip Waste Assembly

Categories

Like Us On Facebook

Like Us On Facebook

Newsletter · Ask Bob · Privacy Policy · Terms · Sitemap

Copyright © 2026 BobsPlumbingVideos.com · All Rights Reserved · Web Design & Marketing by Urmil Patel